Installation Guides

Well made grab bar. The knurling (the bumpy diamond texture,) is just deep enough to provide a good grip without being too deep where it can rip your skin off...a good balance. The wall mounting plates are heavy duty and have options on mounting pattern and hardware size. Great quality stainless steel hardware is included ensuring that nothing can snap off or come loose. Wall anchor inserts are included if you need them. The finish looks great and seems like it will hold up for some time...not easily scratched. The metal, cup style caps, that hide the mounting plates, are a good, tight fit on the mounting plate and the tube of the grab bar, giving a super clean look to the installation. This is a major upgrade, to very similar products that I have reviewed recently: I found some of them to be lacking the quality I expect in a safety device. This meets my expectations: I am not eager to recommend safety products to others blindly. I feel good about recommending this shower safety grab bar, soo, YES: I recommend this product. What you see is what you get...Referring to my Photo....The installation paper is cut off at the bottom of the pic.--that's just the pic...the whole thing arrived intact....

This is a good quality grab bar. The texture on the grabby part provides good grip. It is the perfect size for being at the entrance/exit of my shower. Even though it isn't the same exact color as the shower, it looks good beside it. It is very sturdy and I will have full confidence that it will support my father. Installation of these bars, not my first, is inherently difficult. With building codes, being that close to the shower, you never know exactly what you are getting into. There are MUCH better wall anchors out there that should be included, not the cheap plastic ones. The magnet on the wall is my contribution as to how to locate studs, you're welcome! I recommend this product confidently.

The older I get, the more aware I am of just how easy it is to fall and get badly injured. One of the most common places for accidents is the bathroom, more specifically getting in and out of the shower or tub. We already have a grab bar on each end of the tub/shower to help steady ourselves when getting in or out of the shower. Even young people can slip and fall in the bath. I ordered this helper handle to go on the back wall of the shower. The handle has a textured section along the main part of the bar so your hand doesn’t slip while using the bar. The end caps on each end slide over the mounting plate and bolt heads that attach the bar to the wall securely. These caps cover the mounting plates and also help keep water out of the device so it doesn’t rust. The matte black finish looks elegant too. Everything you need to install the bar securely is included, except a drill and a ceramic or masonry bit if you are installing over tile. Hint: put painters tape over the area where you drill in order to keep from cracking the tile. After drilling, just remove the tape and proceed with the installation. Hubby said it was easy to install, and I didn’t hear any ugly words while he was working on it. He was done in less than 30 minutes.

Turned out great. Very easy to install if you know what you're doing. Super sturdy with no fears of it coming off of the wall. I attached it to the stud as well as the brick siding in areas where there was not a stud.

I was really excited for this as showering or bathing is dangerous for me . My first impression was that it was even smaller than I realized . I knew I wasn't Getting a large one and a lack of measuring is on me . But what was really disappointing, that I couldnt See on the description , is that the textured part is an even smaller portion. So basically one small hand spot , in exactly proper middle placement , has some texture , and that’s it . So if I’m falling and I meed To grab this , I’m def not in my right ninja mind to be able to grab the exact center .That said. It is nice looking and feels very sturdy. It came with decent and long screws and anchors . The black fits my bathrooms aesthetic nicely . And it isn’t so far off the wall that it will be a major bumping hazard, or get in the way.Some minor confusion on instructions . There is no 3 holed part . The instructions shouldn’t be adjusted . Mine had a six holes part instead. It’s simple enough to figure out .It’s way too tight to fit the cover piece over the bar . This means it has to be forced and finagled . Being a disabled person, that made this a lot more difficult than it needed to be .which is ironic since this is for a disabled person . It also means (as shown in the last pic) that the protective coating being shaved off in segments is likely inevitable, or was in my case . I’m afraid that it won’t be rust resistant now and with my white shower that could be a major issue eventually .It def was in my price range and for the cost it isn’t a bad value overall . If you want the higher weight limit, with pretty much anything , you really wanna try to get studs . Or one of them at the very least.It’s not perfect but it is manageable. Does what it needs to do but could use some minor improvement .

Turned out great. Very easy to install if you know what you're doing. Super sturdy with no fears of it coming off of the wall. I attached it to the stud as well as the brick siding in areas where there was not a stud.

I got this grab bar from IJDD. I will install it in my basement to help me get up and out of the basement. We have a steep step that is incredibly difficult for me to get up on because of my knee.This Safety Grab Bar is durable! It is constructed of Stainless Steel and has a textured diamond pattern to help you hold on to it.It's a straightforward install. Just put the bar where you want it and pull back the flange cover. Screw in the screws, and you're good!You want to ensure you attach these to a firm surface. If installed well, the bar can hold about 500 lbs of pressure. We used longer screws with our installation, as we wanted to be really careful that they would not pull out of the wood. I really needed this hand-up! It is a very versatile item you can use in many different ways!You can also get these in different finishes and sizes. Can't go wrong with this product!

This is not a cheap piece of equipment, this is a very sturdy handrail or it could even double as a towel bar, depending on what your needs are. I would feel absolutely comfortable putting this in a shower for my elderly parents, knowing that it's not just going to come out the wall. Normally the hardware with these things is super cheap as well, that was not the case with this item, I highly recommend it. The antique black look is also a favorite of ours, so it can go in your own home or if you flip properties, essential items to get, you can never have enough extra handrails, towel holders etc.

Well made, as described, very sturdy

Good looking heavy duty grab bar. Easy to install.

Needed a grab bar that was black, textured, and 16" in length to finish a bathroom remodel. My contractor is a big fan of Amazon for products he needs so we went with this product. It arrived in good time, was installed with no issues. Looks great. Do not need it but figured a good proactive item these days.

As advertised, like diamond grip on handle.

Attractive and sturdy. Bought because we have a high tub and a disabled family member. Made sure we hit a stud and it is very sturdy. Provides a safe tub exit.

This stainless steel shower grab bar with a textured grip is great quality and well made, offering a sturdy hand-hold in the bathroom that gives peace of mind. The textured surface provides real confidence under wet, slippery conditions.I appreciate how well the bar’s finish resists corrosion and looks sleek, making it suitable for bath tubs, shower stalls, toilet areas, or other spaces where extra support is needed. It’s especially valuable for anyone with mobility issues or those who just want the added safety of a secure handrail.Installation was straightforward with proper anchoring into studs or reinforced wall backing. Once mounted, the bar feels firmly fixed with no noticeable flex—just what you want when using a handrail for support.

Well made. Heavy duty. Multiple screw holes in mounting plate. Makes installation easier. Would buy again if needed

I installed this IJDD shower grab bar in my mom’s bathroom, and it’s been a great addition. It’s 12 inches long and 1¼ inches in diameter, just the right size for a secure grip. The black finish looks sleek and modern, and the textured surface really helps prevent slipping. It’s made of 304 stainless steel, so it feels sturdy and built to last. Installation was simple with the included hardware, and it holds firm against the wall. For around $17, it’s a small investment that adds a lot of safety and peace of mind. Definitely recommend for anyone needing extra support and a great functioning bar.

Works well in my shower area which has a step down. Provides a solid grip hold for all users. Installation was fairly easy.

IJDD Shower Grab Bar, Anti-Slip Safety Grab Bar for Bathroom Bathtub Toilet 304 Stainless Steel Textured Grip Bath Handle Hand Rail for Elderly (Black, 12" L x 1 1/4" D)This short grab bar is the perfect size for beside the toilet. It's well made and looks great. It is very easy to install, especially if you know what you're doing and know how to find a stud in the wall.

I was glad to receive this as quickly as I did. I am redoing a bathroom. This will match the new darker faucet set. It is more lightweight than the older bar but seems sturdy enough to secure you as you are rising up. This, to me, is a tiny bit more crucial than maintaining balance while showering, though that matters also. Texturing the bar is very thoughtful. Soapy or wet hands don’t always have the best grip. The pictures have made me think about other useful applications that had never come to mind. There are choices about the length needed, also. I would say that the quality provided matches the price point. And having the option for Black is a plus for me.